MOLD WIZ INT-PUL-524M, India

Our Products Range

Products for Composites :

Composite Raw Materials

• Resins
    • Satyen Products
    • Ashland India

• Reinforcement
    • Chopped Strand
    • Chopped Strand Mat
    • Combination Mat • Roving
    • Stitched Mat • Surface Tissue
    • Woven Roving

• Specialty Reinforcement
    • Carbon Fibers  • Flow Mat
    • Continuous Filament Mat
    • Core Mat

• Specialty Products
    • Dow Corning Rubber
    • PVC Sheets • Sika Adhesive
    • Door skin

• Pigments
    • Polyester • Polyurethane • Epoxy

• Mould Release :
    • Axel • PVA Powder & Liquid
    • Waxpol  • PVA Powder

• Additives & Fillers

• Peroxides & Metal Oxides
    « BPO « TBPB « MEKP

• Process Accessories
    • Polyster Films
    • Rollers & Brushes
    • Solvents & Cleaners

Specialty Products for
Construction :

    • Fischer • Foscroc • PVC Sheets
    • Recron • Sika

M.S.D.S. :

• Safety Wall Chart

MOLD WIZ INT-PUL-524M
	technical data

General :

A process aid additive designed specifically for pultrusion. The benefit is to optimize line speed while reducing both pull force and die wear. Improves wet out of fiber, fillers and resin flow while reducing viscosity. Physical properties of the profile are retained or improved. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding, or plating.

Use :

Polyester Vinyl Ester
Pultrusion DAP Resin

Composition :

Proprietary synergistic blend of organic fatty acids, esters and amine combined with neutralizing agents.

TYPICAL PROPERTIES :

EFFECTIVE INGREDIENTS:	100%
GARDNER COLOR:	3 max.
SPECIFIC GRAVITY:	0.962 @ 25ºC
VISCOSITY:	100 - 180 cps @25ºC
pH:	4.3
FLASH POINT:	305°F / 152°C (C.O.C.)
SHELF LIFE:	Minimum of one year

Application Instructions :

General: For best results, laboratory tests or pre-production trials should determine the optimum addition level. MoldWiz® Process Aid Additives are effective within a range of 0.75 to 2.0 parts per 100 resin by weight, excluding reinforcements, pigments and fillers. Always start an evaluation at 1 part per 100. High amount of filler may require a higher percentage of process aid additive. Too much additive may retard the cure. Reduce the level of process aid additive or slightly increase the catalyst

Mixing: Mix into resin prior to addition of catalyst, fillers, and other resin additives.