Chopped Strand Mat (EMULSION) |
 |
|
|
| |
Binani Chopped Strand Mat is made of
randomly, yet evenly distributed strands,
chopped from continuous Boron free “E”-
glass fibres into 50mm length, bonded with
“emulsion binder,” possesses excellent surface
bonding efficiency. |
|
|
|
| |
Standards Complied
BS: 14118 & IS: 11551
Major Product Approvals:
• Lloyd’s Register of Shipping
• Det Norske Veritas
• American Bureau of Shipping
• Indian Register of Shipping
|
| |
| Technical Characteristics |
| |
GSM(g/m2) |
Loss on Ignition(%) |
Moisture
Content (%) |
180 |
5.0 |
0.20 max. |
225 |
300 |
375 |
4.5 |
450 |
600 |
900 |
|
| |
| |
Features:
• Easy air removal and rapid resin
impregnation.
• Drapes well to suit the surface of intricate
moulds
• Fast wet-through and wet-out due to
excellent Styrene solubility of binder.
• Easy handling and better appearance of the
composite parts.
• Good surface bonding and high strand
integrity. Compatible with Unsaturated
Polyester resins |
Applications:
• Automotive parts
• FRP Boat hulls
• Building & Construction (Bath
Tubs) etc
• Industrial Parts (Cooling Towers) |
|
| |
| Products Availability |
| |
| Density (gsm) |
Width (cm) |
Roll Weight (Kgs) |
180, 225, 300, 375,
450, 600, 900 |
100 or 125 |
30 - 40 |
|
| |
| |
Packaging
• Each roll is wound on cardboard tubes 76 mm ID x mat length.
• Each roll is covered in polyethylene bags and packed in corrugated cartons
(27 x 27
cm) x standard length.
• 16 cartons per pallet are packed vertically, with stretch wrap protection.
• Pallet dimensions are 110cm. x 110 cm |
| |
| |
Storage:
• Rolls should be protected from sun and to be stored vertically.
• Recommended storage conditions –
o Temperature 25 - 400C.
o Relative Humidity of 35 - 85%.
• To avoid moisture condensation, store packages for 24 hours under workshop
conditions, before use. |
| |
| |
| |
CHOPPED STRAND MAT - (POWDER) |
| |
Binani Chopped Strand Mat is made of
randomly, yet evenly distributed strands,
chopped from continuous Boron free “E” -
glass fibres into 50mm length, bonded with “powder binder,” possesses excellent surface
bonding efficiency. |
|
|
| |
|
| |
Standards Complied
BS: 14118 & IS: 11551
Major Product Approvals:
• Lloyd’s Register of Shipping
• Det Norske Veritas
• American Bureau of Shipping
• Indian Register of Shipping |
| |
| Technical Characteristics |
| |
GSM(g/m2) |
Loss on Ignition(%) |
Moisture
Content (%) |
180 |
5.0 |
0.20 max. |
225 |
300 |
375 |
4.5 |
450 |
600 |
900 |
|
| |
Features:
• Easy air removal and rapid resin
impregnation.
• Drapes well to suit the surface of intricate
moulds
• Fast wet-through and wet-out due to
excellent Styrene solubility of binder.
• Easy handling and better appearance of the
composite parts.
• Good surface bonding and high strand
integrity. Compatible with Unsaturated
Polyester resins |
Applications:
• Decorative Panels
• Rooflight Sheets
• FRP Boat Hulls |
|
| |
| |
| Products Availability |
| |
| Density (gsm) |
Width (cm) |
Roll Weight (Kgs) |
180, 225, 300, 375,
450, 600, 900 |
100 or 125 |
30 - 40 |
|
| |
| |
Packaging
• Each roll is wound on cardboard tubes 76 mm ID x mat length.
• Each roll is covered in polyethylene bags and packed in corrugated cartons
(27 x 27
cm) x standard length.
• 16 cartons per pallet are packed vertically, with stretch wrap protection.
• Pallet dimensions are 110cm. x 110 cm |
| |
| |
Storage:
• Rolls should be protected from sun and to be stored vertically.
• Recommended storage conditions –
o Temperature 25 - 400C.
o Relative Humidity of 35 - 85%.
• To avoid moisture condensation, store packages for 24 hours under workshop
conditions, before use. |
| |
| |
|
